Ravel Conventional Fire Alarm System

Product Details:

Ravel Fire Alarm Control Panel 

RE-104R is a right blend of affordable design and quality with latest technology for fire alarm control panels. This microprocessor based conventional Fire Alarm Control panel, is designed for small size commercial buildings and small scale industries. RE-104 model is an user friendly 4 zone standalone control panel, with optional zone wise Sounder/Contact respectively.

Special Features: 

• Switched Mode Power Supply. 
• Modular Construction, Serviceable.
• Surface Mount Technology.
• Battery polarity & deep discharge protection.
• As per IS -15908: 2011 Standard.
• 16 X 2 Dot Matrix LCD Display.
• Standby battery backup with built in charging.
• Lamp Test facility
• Zone wise one man Walk Test Facility.
• Low Battery visual warning with audible tone
•  

Product Details:

RE-900RP Fire Alarm Repeater Panel. 

RE-900RP Series is a microprocessor based Fire Alarm Repeater Panel and which is compatible to RE - 900 Series Fire Alarm Control Panels. It is communicated with RE - 900 series FACP through RS485 and shows the status of the FACP Connected with it or FACP's in network.

Features:

• 20 X 4 Dot Matrix LCD display.
• Alphanumeric keypads.
• RS 485 Communication for Network Repeater.
• System ON, AC ON, Battery ON, Charger ON indications.
• Lamp test facility.
• Maximum 16 panels including repeater can be connected in a Single Network via RS-485.
• Repeater Panel can monitor the status of RE-900 series panels via RS-485 Network communication.
• User can Disable / Enable the Zone of Fire Alarm Control Panel Connected in network.
• Ravel Indian Manufacturer, International standard.
• Operates on RS-485 communication.

Product Details:

Ravel Fire Control Panel - RE 900 Series

RE-900 Series, Microprocessor based conventional Fire Alarm Control Panel, are designed to be used for medium and large size commercial complexes and industrial establishments.This panel can accommodate a range of 12 zones upto 128 zones.User friendly systems which involves a touch keypad to program the panel. This can be used as a standalone or networkable panel.

Features : 

• Complies with UL -864 and NEPA -72
• 20 x 4 dot matrix LCD display.
• Operates on 120 - 220VAC 60 /50 Hz, AC mains power supply
• Standby (battery) backup 24 VDC power supply with built in charger
• Touch keypad for user friendly operation. 
• RS 485 Communication facility. 
• TCP/IP facility (Optional)
• PC software (optional)
• MODBUS for Building Management System integration (Optional).
• Zones available : 12, 16, 20, 24, 32, 48, 64,96 and 128
• Maximum 16 panels can be connected to a single network. 

Product Details:

Ravel Fire Alarm Control Panel - UL Listed

RE-2554 is an UL Listed Microprocessor based conventional Fire Alarm Control Panel which has 4 Zones. These control panels are designed to be used in small and medium sized commercial complexes, buildings, hotels, schools, and industrial establishments. They are compatible with conventional detectors, manual call points and normally open dry contact devices.

Special Features:

• Switched Mode Power Supply.
• Modular Construction
• Auto Resettable Fuse
• Surge Protection for all Input and outputs.
• Programmable AC loss delay/Trouble Remainder/Alarm Verification
• Battery polarity reversible protection
• Surface Mount Technology
• Over All current consumption is low
• Fully complies with UL -864 and NFPA-72
• 16x2 Dot Matrix LCD display.
• RS 485 Communication facility (Optional)
• Walk test facility

Product Details:

Ravel Conventional Smoke Detector RE 326-2SL


The Conventional RE-326 detectors are designed by a competent fire alarm sensors designer in accordance with the requirements of EN – 54 and any other local codes of practice that are applicable. It will compatible all conventional Fire Alarm Panels. There are range of 2/4 wire detectors in this series like Ionisation and Heat with Remote LED.
The innovative thermistor sensing circuit is provided in RE 326-2HLdetector to give 57 C thermal detection in a low profile package and Also in the 4 wire detectors with 12V / 24V operating voltage. RE 326-2SL photoelectric detectors have unique optical sensing chamber to sense smoke produced by a wide range of combustion sources. The model RE-326-412S is the 4wire 12V Operating smoke detector

Features:

• Dual LED’s for 360 visibility
• Advanced detection and communication protocol.
• Easy installation and maintenance.
• Sleek low -profile housing design.
• EN-54 Standard.

Get best price for Photoelectric Plastic Conventional Smoke Detector, For Office Buildings

Product Details:

Ø High efficient single sampling tube Ø Easy to install Ø One-pipe air sampling system Ø Patented venturi pipe and duct housing Ø Test hole on cover Ø Simple installation Ø Simple service and maintenance 

Product Details:

Ravel Conventional Photoelectric Smoke Detector - RE316S-2L

The RE 316S-2L conventional detectors are designed to work with all conventional Panels. These detectors are low profile and have O dual LED’s for 360 visual indication. The blinking LED’s indicate normal operating conditions whereas the steady state indicate fire status. It has an unique protocol chamber designed to sense smoke produced by wide range of sources of combustion. It has a unique drift compensation feature where in the detector adjusts its normal reference based on environment conditions.

Features:  

• UL listed.
• Dual LED’s for 360 visibility
• Advanced detection and communication protocol.
• Easy installation and maintenance.
• Sleek low-profile housing design.

Product Details:

Ravel Fire Alarm Control Panel - UL Listed

RE-2558 is an UL Listed Microprocessor based conventional Fire Alarm Control Panel which has 8 Zones . These control panels are designed to be used in small and medium sized commercial complexes, buildings, hotels, schools, and industrial establishments. They are compatible with conventional detectors, manual call points and normally open dry contact devices.

Special Features:

• Switched Mode Power Supply.
• Modular Construction.
• Auto Resettable Fuse
• Surge Protection for all Input and outputs.
• Programmable AC loss delay/Trouble Remainder/Alarm Verification.
• Surface Mount Technology
• Fully complies with UL -864 and NFPA-72. 
• 16x2 dot matrix LCD display
• Walk test facility 

Product Details:

Our company is highly esteemed in offering Normex Valve.

RE-2APS, RE-5APS Power Supply Panel


The RE-2APS is compact and cost effective 2 Amps power supply with build-in charger. It may be connect to the any 24 Volt Fire alarm control panel or may be standalone for the primary applications like Notification appliance circuit expansion or auxiliary power to support 24 Volt system accessories. It provides regulated and filtered 24 VDC power to NAC’s and it also contains a battery charger capable of charging up to 14 Ah batteries.

Features :

• Operates on 220V, A.C supply. 
• Battery backup with built in charging. 
• Low battery visual warning with audible tone
• DC Output indication.

Product Details:

RE-120GR is a microprocessor based Agent Release Panel. These panel are a feature packed control unit performing dual function of detection and controlled release of gaseous agent. These panels have 2 detection circuits and 1 agent release circuit with various programmable options. The panel have all the safety features to prevent accidental release, easy to install, commission with user friendly programmable option, this panel is ideal choice to protect the premises

Product Details:

Ravel 4 zone gas release panel
RE-25AR Agent Release Panel fully complies with UL-864 and NFPA-72. These panel are a feature packed control unit performing dual function of detection and controlled release of gaseous agent. These panels have 4 detection circuits and 2 agent release circuit with various programmable options. The panel have all the safety features to prevent accidental release, easy to install, commission with user friendly programmable option, this panel is ideal choice to protect the premises. While implementing the latest in microprocessor technology for conventional panels ease to operate along with clear visible indications come at an advantage for the end user

Additional Information:

• Packaging Details: RE-120GR is a microprocessor based Agent Release Panel

Product Details:

Ravel Fire Alarm Control Panel 

RE-102 is a right blend of affordable design and quality with latest technology for fire alarm control panels. This microprocessor based conventional Fire Alarm Control panel, is designed to be used for small size commercial buildings and small scale industries. RE-102 model is an user friendly 2 zone standalone control panel, with optional zone wise Sounder/Contact respectively.

Special Features:

• Switched Mode Power Supply.
• Modular Construction, Serviceable.
• Surface Mount Technology. 
• Battery polarity & deep discharge protection
• As per IS -15908: 2011 Standard.
• 16 X 2 Dot Matrix LCD Display
• Standby battery backup with built in charging
• Switch Mode Power Supply
• Tactile Keypad for easy panel operation
• Zone wise one man Walk Test Facility.
• Optional Zone Wise Sounder / Zone Wise Contact
•  

 

Product Details:

Ravel Conventional Heat Detector RE316H-2L- UL Listed

The RE 316H-2L Conventional detectors are designed to work with all conventional Panels. These detectors are low profile and have O dual LED’s for 360 visual indication. The blinking LED’s indicate normal operating conditions whereas the steady state indicate fire status. 

RE 316H-2L is a fixed cum rate of rise heat detector using a thermistor. These detectors will raise an alarm when the detector O reaches 59 C(Fixed) or when the change in temperature exceeds O the rate of rise of 11 C / min

Features: 

• UL listed.
• Dual LED’s for 360 visibility.
• Polarity free wiring.
• Advanced detection.
• Easy installation and maintenance.
• Sleek low-profile housing design.
• Regular 100mm base.

Product Details:

The RE 316SH-2Lconventional detectors are designed to work with all conventional Panels. These detectors are low profile and have O dual LED’s for 360 visual indication. The blinking LED’s indicate normal operating conditions whereas the steady state indicate fire status.

Features:

• UL Approved.
• Dual LED’s for 360 visibility. 
• Advanced detection and communication protocol.
• Easy installation and maintenance.
• Regular 100mm base.

Get best price for Conventional Multi Sensor Detector

Product Details:

Ravel manual pull station – single / dual - re-716p1t/ re-716p1tlp (r)

Manual Pull Station is made up of a high quality non-toxic die-cast material. Low profile design and smooth edges offer an attractive yet functional design. All components are pre-painted or have plated surfaces to inhibit corrosion. Electrically the manual pull station is unbeatable with 10 Amp snap action switch offered in all possible contact arrangements (including gold contacts). The manual pull station can be used with or without a break glass rod, with replacement requiring no special tools.

Features:

• UL Listed.
• FIRE ALARM written on enclosure.
• Easy to install
• Lift and Pull 
• Break glass Rod.
• All stations offer hex screw or key lock access.
• Single Gang Mounting.
• Enclosure Complies IP 40 as per IEC standard 60529. 

Product Details:

Manual Pull Station is made up of a high quality non‐toxic die‐cast material. Low profile design and smooth edges offer an attractive yet functional design. All components are pre‐painted or have plated surfaces to inhibit corrosion. Electrically the manual pull station is unbeatable with 10 Amp snap action switch offered in all possible contact arrangements (including gold contacts). The manual pull station can be used with or without a break glass rod, with replacement requiring no special tools.

Additional Information:

• Item Code: RE716P1T
• Production Capacity: 100
• Delivery Time: 2 WEEKS

Product Details:

Ravel Conventional Sounder / Horn Cum Strobe - RE-25SS

Sounder / Horn cum strobe is designed for fire and security applications. It gives both audio and visual indication in case of fire and emergency. The horns can be flush / ceiling mounted with /without back box. Xeon Flash tube Strobe light shall flash 60 times in a minute with 1Hz over entire operating voltage range. Horn output dB level between 80 to 100 db in a meter distance. Horn cum strobe offer three different field configurable sound settings like ambulance sound, fire truck sound and police car sound.

Features:

• Complies NFPA 72 standard.
• CE Certified 
• RoHS compliant
• 3 type of field configurable tone settings
• 100db @1meter distance
• 24VDC Operating Voltage.
• Easy to Install. 

Product Details:

Response Indicator - RE-RI

Response indicators are used as an auxiliary indication for detectors that are located in closed spaces such as above false roofing, below false floor and closed rooms. Detectors are equipped at the terminals for connecting their response indicator.
The LED's on this indicator lights up when the corresponding detector gets latched or detects fire. 

Features:

• Compatible for 2 wire detectors.
• Alarm status is indicated by red colour LED.
• Operates on 12 VDC.
• Dual LED’s for 360 visibility
• Flush / Ceiling wall mount. 

Product Details:

Ravel Conventional Sounder - RE-24CS

Sounders are designed to simplify installations to provide primary and secondary for fire and security applications. These are ideal where smaller notifications devices are desired. These sounders can be flush / ceiling mounted with / without back box

Features:

• Best in class
• Durable
• Slim and Sleek
• Sounder with Back Box.
• Wall or Ceiling mountable.
• 24VDC Operation
• They are used in Fire, Burglar & Emergency Alarm System. 
• Perfect in quality

Additional Information:

• Delivery Time: READY STOCK OR 1 WEEKS

Product Details:

Ravel Conventional Manual Call Point (Red)

RE-716M series are conventional call points to bypass Fire alarm alert by pressing the front glass. 

Features:

• Alarm status is indicated By Red colour LED.
• Operates on 24 VDC. 
• Red, Green, Yellow colour Plastic MCP’s.  
• 1 No’s of CO & NC Output.

 

Product Details:

Optical Beam Detector

TheRE-428 Series beam smoke detector is designed for smoke detection at the start of a fire. It is especially suitable for protection of indoor spaces, in which the appearance of smoke is likely during ignition of a fire, and where, due to a large space area, installation of a greater number of point smoke detectors would benecessary. The RE-428 Series beam smoke detector and the prism reflector or reflector panel are installed on opposite walls of a room.

Features:

• User Friendly Installation
• In built laser light for easy alignment
•  Supports 5 to100 meter range
•  Option for Remote Indication
•  Provision to connect with Fire Man Telephone System
•  Adjusting Screws at detector for precise alignment
•  Infrared transmitter & receiver located in a single housing
•  In built drift compensation for monitoring dirt build up on the optical system
•  Sensitivity Threshold :- 18% ,30%, 50% 

NOTE:
RE-428 Series Beam detector can be used for both conventional and addressable Fire Alarm System. In case of addressable system suitable RE-717ZM (Zone Interface Module) to be incorporated for each detector.

Get best price for Optical Ravel Beam Detector