Ravel addressable Fire Alarm systems

Product Details:

AVANI - SOFT  - Graphic Software

The Avani Soft Graphic software is the best solution available for representation of the site in graphical form. The Graphical representation enables the user to easily monitor, navigate and control the installed on site. The software also provides an extensive History log for the user to analyze the system.

Features:

• User friendly with windows based software.
• Three Level Multi User Access.
• Multi Mode (Ethernet / USB )Communication Facility.
• Facility to monitor and Control the fire alarm control panels from a single window.
• Unambiguous Visual & Audible alerts for fire and fault conditions.
• Pop up for any events like fire, fault, power fault, etc.
• Maximum of 32 AVANI addressable fire alarm control panels shall be monitored and controlled through the software.
•  Event Fetch from fire alarm control panel facility.
• Single / Multi Mode Floor Configuration facility
• Floor Configuration using DWG / DXF Files. 

 

Product Details:

Ravel avani addressable Fire Addressable Panel

Avani is an analogue addressable having an extensive lost of powerful features.The panel has maximum capacity for four loopcards plug in type. On board USB port,on board RS-485 connectivity and touch keypad.Each loop can supports upto 254 devices of any combination and single panel shall support upto 1016 devices of any combination.Higher loop requirement can be catered by using the in bulit networking features of the Fire Alarm Control Panel. Modules & Ethernet connectivity optional connectivity of modbus converter & Ethernet is avaliable.

Features:

• UL Listed (9th Edition)
• Device / Detector wise configuration facility.
• 2000 Event Storage with Real Time Clock.
• Upto 192 grouping facility.
• Programmable detector sensitivity
• Earth fault annunciation facility at 0 ohms.
• Double Address Sensing.
• 40 X 4 Characters LCD display.
• 5 IDC Loops (4 Addressable and 1 Conventional loop).
• Maximum 254 devices (any combination) per loop.
• 32 bit processor.
• Multi protocol.
• Peer to Peer Networking.

 

Product Details:

RE-717MR - ADDRESSABLE RELAY MODULE 

Relay Module is an output module facilitates dual form C potential free contact to integrate the third-party devices with Fire Alarm Control panels like lift, pressure fan, access control etc. The RED blinking LED indicates normal operating conditions and the steady state LED for activated conditions. DIP switches are provided for addressing of the module.

FEATURES:

• UL Listed (9th Edition)
• CE Approved.
• Module Status by RED LED
• Dual Form C Potential free contacts.
• Non supervised Output
• Addressing by 8 way DIP switches. 
• Low Standby Current
• Modular Construction. 

Compatiable Device

• Avani Analogue addressable Fire Alarm Control panel expandable upto 4 loop

• Avani db Analogue Addressable Fire Alarm Control panel expandable upto 2 loop

Avani XL Analogue Addressable Fire Alarm Control Panel expandable upto 8 Loop 

Product Details:

Avani is an analogue addressable having an extensive lost of powerful features.The panel has maximum capacity for four loopcards plug in type. On board USB port,on board RS-485 connectivity and touch keypad.Each loop can supports upto 254 devices of any combination and single panel shall support upto 1016 devices of any combination.Higher loop requirement can be catered by using the in bulit networking features of the Fire Alarm Control Panel. Modules & Ethernet connectivity optional connectivity of modbus converter & Ethernet is avaliable.

Product Details:

Addressable multi sensor detector(s) are designed to work with Addressable panel. These detectors are low profile, polarity free and have dual LED’s for 360° visual indication. The LED’s are blinking in normal operating condition whereas the LED's in steady state indicate fire status. The fixed cum rate of rise heat detector works using a thermistor. These detectors will raise an alarm when the detector reaches 59°C (Fixed) or when the change in temperature exceeds the rate of rise @ 11°C / min.It has an unique chamber designed to sense smoke produced bywide range of sources of combustion with insect free. The detectors sensitivity can be programmed via FACP. It has a unique drift compensation feature wherein the detector adjusts its normal referencebasedonenvironment conditions. 

Product Details:

Monitor Module is an input module facilitates to interface with third party devices like security contacts, waterflow switches, pull stations, etc. with Fire Alarm Control Panel. The RED blinking LED indicates normal operating conditions and the steady state LED for activated conditions. DIP switches are provided for addressing of the module. The Monitor circuit is supervised for faulty condition

Product Details:

RE-LC Loop Card for AVANI, intelligent addressable fire alarm control panel. Up to 254 devices can be connected to a single loop card. These loop card can plugged in to slot provided in the motherboard of Main panel (Avani). RE-LC Loop Card is compatible with Addressable Detectors, Manual Call Points, Modules etc., The status of the loop shown by dual colouor LED

Additional Information:

• Production Capacity: 10
• Delivery Time: READY STOCK

Product Details:

The Isolator module is an automatic device that isolates a part of the loop by opening when the line voltage drops below 14Volts. These modules should be spaced between groups of sensors or modules in a loop to isolate the faulty area from the rest of the loop. If a short occurs between any two isolators, then both isolators immediately switch to an open state and isolate the devices between them. The remaining units on the loop continue to fully operate. Recommended to connect a maximum of 20 devices to each isolator. The module blinks indicating normal status and a steady glow when activated.

Product Details:

Ravel RE - 717MZ zone module permits the addressable FACP to interface and monitor 2-wire /4-wire conventional smoke detectors and manual call point. The RE-717MZ module is addressed by using the DIP switch to communicate with addressable FACP. It transmits the status (normal, open, short or alarm) of one zone of 2-wire / 4- wire detectors to the FACP. Zone module supervises the zone of detectors and the connection of the external power supply respectively

Product Details:

Addressable heat detector(s) are designed to work with Addressable Fire Alarm Control Panel. Thesedetectors are low profile, polarity free and have dual LED’s for 360° visual indication. The LED’s are blinking innormal operating condition whereas the LED's in steady state indicate alarm status.Addressable heat detector is a fixed cum rate of rise heat detector using a thermistor. These detectorswill raise an alarm when the detector reaches 59°C (Fixed) or when the change in temperature exceeds the rateof rise of 11°C / min.

Product Details:

Control Module is the remote switching device to control 24V operating devices like Bells, Sounders, Strobes, etc. The required supply is drawn from a 24V power supply unit. The RED blinking LED indicates normal operating conditions and the steady state LED for activatedconditions. DIP switches are provided for addressing of the module.The output and auxiliary input voltage is supervised for faulty condition